GLOW 70MG MATERIAL SAFETY DATA SHEET (SDS)

Substance	GLOW Blend
Revision Date	2026-05-08
NOTICE	This is a research use only peptide. Not for human or veterinary consumption.
Product Identifier	GLOW Blend peptide blend, total declared fill 70 mg
Common Synonyms	GLOW peptide blend; research peptide blend
Chemical Formula	Mixture / Not established for blend
Molecular Weight	Not established for blend
Recommended Use	Laboratory / Research Chemical
Supplier Details	[Supplier to Insert Company Name, Address, and Emergency Phone]
CAS / Lot Number	[Supplier to Insert Specific CAS No. / blend identifier and Lot Data]

1. Identification

Product Name: GLOW Blend.

Restrictions on Use: For research and laboratory use only. Not intended for human or animal diagnostic or therapeutic uses.

2. Hazard(s) Identification

Classification: Based on available information, this blend is not fully characterized. It is not expected to be classified as a hazardous chemical under normal laboratory handling conditions (e.g., GHS classification not established or not classified as hazardous).

Potential Health Effects: While not fully characterized, fine dust may cause mechanical irritation to the eyes, skin, and respiratory tract. Overexposure to dust should be avoided.

3. Composition / Information on Ingredients

Substance Name: GLOW Blend (Peptide Mixture)

Purity / Impurities: Total declared fill is 70 mg. Supplier must confirm purity/concentration and the presence of any hazardous impurities before use.

Ingredient	Amount	Approx. %	Description
GHK-Cu	50 mg	71.4%	Copper peptide for skin, hair, and tissue regeneration.
BPC-157	10 mg	14.3%	Promotes healing of tendons, ligaments, and gut health.
TB-500	10 mg	14.3%	Synthetic thymosin beta-4 for cell migration and tissue repair.

4. First-Aid Measures

Inhalation: If dust is inhaled, move person to fresh air. If not breathing or breathing is difficult, seek medical attention.

Skin Contact: Wash off with soap and plenty of water. Remove contaminated clothing. Seek medical advice if irritation develops.

Eye Contact: Flush eyes with copious amounts of water for at least 15 minutes as a precaution. Seek medical attention if irritation persists.

Ingestion: Rinse mouth with water. Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice. Seek medical advice.

5. Fire-Fighting Measures

Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.

Specific Hazards: Decomposition may form carbon oxides, nitrogen oxides, sulfur oxides (if sulfur-containing residues are present), and metal-containing fumes/oxides may be possible due to the copper complex component.

Fire-Fighting Instructions: Wear self-contained breathing apparatus (SCBA) and standard structural firefighter protective clothing if necessary.

6. Accidental Release Measures

Personal Precautions: Use personal protective equipment (see Section 8). Avoid dust formation. Avoid breathing dust, vapors, or mist. Ensure adequate ventilation.

Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

Clean-up Methods: Sweep up and shovel carefully to minimize dust generation. Keep in suitable, closed containers for disposal.

7. Handling and Storage

Handling: Provide appropriate exhaust ventilation at places where dust is formed. Avoid contact with skin and eyes. Practice good industrial hygiene.

Storage: Keep container tightly closed in a dry and well-ventilated place. Recommended storage temperature: 2–8°C (unless supplier specifies otherwise). Protect from moisture and light.

8. Exposure Controls / Personal Protection

Exposure Limits: No occupational exposure limits established for this blend.

Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Use general or local exhaust ventilation to minimize dust exposure.

Personal Protective Equipment (PPE):

• Eye Protection: Safety glasses with side-shields conforming to standard lab safety regulations.
• Hand Protection: Compatible chemical-resistant gloves (e.g., nitrile). Inspect before use.
• Skin/Body Protection: Standard laboratory coat or appropriate workwear.
• Respiratory Protection: Not generally required under normal conditions. Where dust generation is significant, use a certified dust mask or respirator.

9. Physical and Chemical Properties

• Appearance: Lyophilized powder or solid blend
• Color: White to off-white to pale blue depending on blend appearance
• Odor: Not established
• pH: Not established
• Melting / Freezing Point: Not established
• Initial Boiling Point: Not applicable for solid
• Flash Point: Not applicable
• Flammability (solid, gas): Not available
• Solubility: May be partially to fully soluble in water or aqueous buffers depending on formulation
• Partition Coefficient (n-octanol/water): Not available
• Auto-ignition Temperature: Not available

10. Stability and Reactivity

Reactivity: No data available.

Chemical Stability: Stable under recommended storage conditions.

Possibility of Hazardous Reactions: Not established.

Conditions to Avoid: Avoid moisture, exposure to light, and elevated temperatures.

Incompatible Materials: Strong oxidizing agents.

Hazardous Decomposition Products: No data available. Formed under fire conditions: Carbon oxides, nitrogen oxides, sulfur oxides, and copper oxides.

11. Toxicological Information

Acute Toxicity: Specific acute toxicity values not established. Treat as potentially harmful if swallowed, inhaled, or absorbed through skin in quantity.

Skin Corrosion/Irritation: Dust may cause mechanical skin irritation.

Serious Eye Damage/Irritation: Dust may cause mechanical eye irritation.

Respiratory or Skin Sensitization: Not available.

Germ Cell Mutagenicity: Not available.

Carcinogenicity: Not available.

Reproductive Toxicity: Not available.

12. Ecological Information

Ecotoxicity: No data available for aquatic toxicity.

Persistence and Degradability: Not available.

Bioaccumulative Potential: Not available.

Mobility in Soil: Not available.

13. Disposal Considerations

Waste Disposal Methods: Offer surplus and non-recyclable solutions to a licensed disposal company. Dispose of in accordance with local, regional, national, and international regulations.

Contaminated Packaging: Dispose of as unused product.

14. Transport Information

DOT (US) / IMDG / IATA: Generally not regulated as dangerous goods based on available information. Supplier to confirm.

15. Regulatory Information

Safety, Health and Environmental Regulations: This product is typically used for research purposes and is not subject to specific stringent hazardous substance regulations under standard listings. Supplier to confirm status under TSCA, REACH, or local equivalent chemical inventories.

16. Other Information

Revision Date: 2026-05-08

Disclaimer: The information provided in this document is believed to be correct but does not purport to be all-inclusive and shall be used only as a guide. The information is based on the present state of knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product.